A Quick-Start Guide To The Baofeng DM-1701

Originally posted on Brushbeater. -NCS

Since I got started in all of this, WAY back when (over a decade ago), a perennial need I looked for was electronic encrypted units for a small team- not unlike what we had in the MBITR at the time- and the search by and large turned up either way more expensive than it was worth or worse than desirable. The old Trisquare units were just ‘ok’, Motorola DTRs had limited range, limited utility, and re-manufactured batteries in most cases that had marginal battery life at best.

Over the years I’ve researched other options and the current best one for inter-team communications is Baofeng’s DM-1701 DMR radio. Its a true DMR and is fully compatible with any DMR system, which is attractive to many Hams getting into the DMR side of the hobby but as I teach in class, its also a very attractive option for small teams operating in the field. From its SMS messaging feature to the digital encoding and option for encryption, it takes capability to a new level while adding a serious layer of protection against electronic warfare and exploitation. Going back a few years, the accounts on this blog form Ukrainian Civil War is a very telling tale of the utility of DMR when implemented properly.

But with that said, many of you have asked for a ‘quick start’ to programing the DM-1701 by hand. Its a confusing rig at first. Right out of the box it’s stuck in the default memory mode, so any chance of programing that well-planned SOI is a daunting task. Well, let’s talk about how to overcome that.

Before you plug anything in, before you boot up any software, follow these instructions. Let’s get something out of the way up front: this is *not* for Ham radio use. You ain’t bullshitting with Tommy and Jeff on the local repeater with this. Now that we’re over that hurdle, let’s talk about how to set up our radio right out of the box.

  1. Switch it on. Wait for it to boot up. You’ll start on the top frequency when it boots up.
  2. Hold down the RED button on the front panel until the radio beeps. This is taking it out of memory mode and into VFO (direct frequency input) mode.
  3. Hit the DOWN button to go to the bottom frequency.
  4. Repeat Step 2.
  5. Enter the Operating Frequencies. These are now the frequencies you’ll be operating on.
  6. You’ll notice the bottom frequency is now Analog. It’ll allow you to communicate with anyone who’s got an analog radio, ie a Baofeng UV-5R.
  7. The top frequency is Digital (DMR). This allows the use of SMS messaging and is encoding your signal in DMR.
  8. Hit the Up and Down arrows to switch between the two. The radio is by default a dual watch, meaning it monitors both frequencies at once.
  9. Make sure all of the Timeslots and Color Codes match on your radios. This controls the modulation of the signal and how it received on the other end- more often than not, the radios won’t talk to one another because one of these is ‘off’ just a bit. Have a pen and paper handy and write down what setting your using and make sure all of them match.

And with that, you should be good to go for in-the-field programming. See, wasn’t so hard now, right? If you get hung up, that’s ok, bring it to class. I’ll get you squared away and show everyone else what we’re doing while we do it. It’s a frustrating task if you’ve never done it and I enjoy helping folks.

If you need programming help with the software, Captain Attila wrote an awesome guide here.

Happy Hunting and I’ll see you in class.

Spread the love
                

Share This Story, Choose Your Platform!

About the Author: NC Scout

NC Scout is the nom de guerre of a former Infantry Scout and Sergeant in one of the Army’s best Reconnaissance Units. He has combat tours in both Iraq and Afghanistan. He teaches a series of courses focusing on small unit skills rarely if ever taught anywhere else in the prepping and survival field, including his RTO Course which focuses on small unit communications. In his free time he is an avid hunter, bushcrafter, writer, long range shooter, prepper, amateur radio operator and Libertarian activist. He can be contacted at [email protected] or via his blog at brushbeater.wordpress.com .

9 Comments

  1. Anonymous December 3, 2020 at 06:24

    5

  2. LuKe December 3, 2020 at 08:01

    Thank you for this NC!!!

    • NC Scout December 3, 2020 at 08:21

      You’re welcome brother!

  3. wwes December 3, 2020 at 08:13

    Thanks for all of the info on the DM-1701’s I had heard a lot of talk about DMR on one of the local 2m repeaters I like to use, and I have been wanting to get into the DM-1701’s, but didn’t know where to start as far as setting them up. You’re right that they seem pretty daunting for someone who hasn’t used one before.

  4. Sixalpha December 5, 2020 at 09:31

    I just purchased two DM-1701’s. The first thing I see is a sticker on the box that states the radios were made in China. Doesn’t this raise red flags with anyone? Please tell me why I should use these.

    • NC Scout December 5, 2020 at 13:17

      Find one that ain’t.

      • Sixalpha December 5, 2020 at 13:19

        Roger that.

  5. Steven Spaugh December 9, 2020 at 18:22

    Make sure all of the Timeslots and Color Codes match on your radios.

    Could you explain?

  6. Big Daddy December 13, 2020 at 12:09

    Picked up an Anytone AT878UV and been playing with it for about a week now. DMR equipped radios are force multipliers for sure. They take some brainpower to set up, but there’s nothing YouTube cant teach. Thanks for all the goodies Brushbeater, I’ve learned a lot from you over the years, keep up the great educational work!

Comments are closed.

GUNS N GEAR

Categories

Archives

Spread the love